The best way to clean indoor air
Traditionally, mechanical and electrical filtration have been the main technologies for purifying indoor air. Used alone, they both have limitations and need to compromise on either filtration efficiency or the air flow. Air0’s patented smAIRt® Technology combines these two in an unique way to deliver unrivalled purification performance.
Extremely high and proven Clean Air Delivery Rate (CADR)
With air purifiers, the most important factor is Clean Air Delivery Rate, CADR. In other words, how much clean air the air purifier is able to produce. It’s a simple calculation of air flow x filtration efficiency.
Air0 Purifiers have excellent CADR values, enabled by our unique and patented technology, combining mechanical and electrical filtration in an optimal way. The filtration system is described in more details below.
Removes even the ultrafine particles
When it comes to air pollutants, the ultrafine particles are the most harmful for human beings, the most difficult to observe with sensors and the hardest ones to catch with filters without compromising on the air flow. We at Air0 did not want to compromise, not on the air flow nor on the filtration efficiency of the ultrafine particles. After years of product development, we matched our goals!
Air0 Purifiers are tested by accredited third party research center (VTT Technical Research Centre of Finland Ltd), and as the graph shows, Air0 Purifiers remove even the ultrafine particles from the air. Same tests proved the high numbers for CADR. Test report is available on request.
Why we don’t use HEPA?
This is a question we hear often. HEPA filters have proven efficiency in filtering small particles, but they are however problematic with the air flow. Low air flow result in low Clean Air Delivery Rate (CADR) and thus mechanical air purifiers end up cleaning only small portion of air around them.
Why no ozone?
Air0 Purifiers have been tested by accredited third party research center (VTT Technical Research Centre of Finland Ltd) and proven not to generate any ozone. This is due to unique combination of four step filtration system, which is explained in more detail below.
smAIRt® 4-step filtration system
The patented smAIRt® filtration system has four levels and the unique technology brings the best out of mechanical and electrical filtration. As a result, indoor air is purified efficiently in the whole room.
Step 1.
Pre-filtration
smAIRt® pre-filter is a fibre filter. It’s main purpose is to protect the inner parts of the purifier. It also collects dust and bigger particles from the air.
1
1
Step 1.
Pre-filtration
smAIRt® pre-filter is a fibre filter. It’s main purpose is to protect the inner parts of the purifier. It also collects dust and bigger particles from the air.
2
Step 2. Charger
smAIRt® Charger uses ionizing to efficiently charge impurities. This electrical charge makes even the finest particles stoppable with filters.
Air0 Purifiers use unique ionizing method, which enables effective charging results with low voltage levels.
2
Step 2. Charger
smAIRt® Charger uses ionizing to efficiently charge impurities. This electrical charge makes even the finest particles stoppable with filters.
Air0 Purifiers use unique ionizing method, which enables effective charging results with low voltage levels.
Step 3.
Fineparticle filters
smAIRt® fineparticle filters are fibre filters. Their task is to stop particles (even ultrafine sized below 0.1 μm), allergens, mold spores, bacteria and viruses.
3
3
Step 3.
Fineparticle filters
smAIRt® fineparticle filters are fibre filters. Their task is to stop particles (even ultrafine sized below 0.1 μm), allergens, mold spores, bacteria and viruses.
4
Step 4.
Activated Carbon
Activated carbon is the last phase in smAIRt® filtration system. Activated carbon is integrated into the surface of the fineparticle filters. The function of activated carbon is to stop gaseous compounds (VOC, gases emitted by mold spores). In addition, it stops ozone and as such, also reduces the total amount of ozone in the room.
4
Step 4.
Activated Carbon
Activated carbon is the last phase in smAIRt® filtration system. Activated carbon is integrated into the surface of the fineparticle filters. The function of activated carbon is to stop gaseous compounds (VOC, gases emitted by mold spores). In addition, it stops ozone and as such, also reduces the total amount of ozone in the room.
Meet Air0 Purifiers – best solution to clean indoor air.
Two models, infinite possibilities. Air0 purifiers are standalone models, equipped with the most efficient purification technology. They are powerful and they are beautiful – designed and handcrafted in Finland, where form meets function. They are truly like nothing else in the air purification market.